Entry Level Business IP Phone KV-N2S4-P/V3

Overview

The KV-N2S4-P/V3 IP phone from the Radonium series is an upgraded entry-level business phone that delivers HD-quality voice communication in office environments. It features a 2.4-inch color display, support for 4 SIP lines and 3 programmable DSS keys for quick access to network functions. Dual Gigabit Ethernet ports with PoE support, 6-way audio conferencing and full compatibility with leading platforms such as Asterisk and BroadSoft ensure flawless performance.

Technical specifications

Datasheet (PDF)

Model: KV-N2S4-P/V3

Generic

Specification: 2.4-inch color screen 4 SIP Lines HD Voice PoE Enabled
Phone Functions: Call logs (In/Out/Missed, 1000 entries) Local Phonebook (1000 entries) Programmable DSS/Soft keys Remote Phonebook (XML/LDAP, 1000 entries) VMWI
Call Functions: 6-way Audio Conference Call Forward (Always/Busy/No Answer) Call Hold/Resume Call out/Answer/Reject Call Transfer (Attended/Unattended) Call Waiting Caller ID Display Intercom Mute/Unmute (Microphone)
Video: N/A

Network & Management

IP Mode: IPv4/IPv6/IPv4&IPv6

Protocols

Protocols: 802.1p/Q 802.1x AES128 & AES256 DHCP FTP/TFTP HTTP/HTTPS IPv6 L2TP LLDP OpenVPN PPPoE RTP/RTCP/SRTP(Optional/Compulsory) SIP v1 (RFC2543) v2(RFC3261) SNTP STUN TR-069 UDP/TCP/TLS

General

Installation: Desktop Stand; Wall mountable (optional)
Dimensions: 178x191x171 mm (Desktop Stand)

Audio

Audio: HD Voice: HD handset, HD speaker Wideband ADC/DAC 16KHz Sampling
Narrowband Codec: G.711a/u, G.723.1, G.726, G.729, G.729A, G.729AB, G.729B, ILBC
Wideband Codec: G.722, Opus

Network

Physical: 10/100/1000 Mbps Ethernet dual bridged port for PC bypass
IP Configuration: 802.1x DHCP Network Access Control PPPoE Static IP
VPN: L2TP, OpenVPN
VLAN: (RFC6035) VLAN / LLDP / Qo5/ RTCP-XR (RFC3611) VQ-RTCPXR

Deployment & Management

Deployment & Management: Auto-Provisioning via FTP/TFTP/HTTP/HTTPS/DHCP OPT66/SIP PNP/TR-069 Configuration Export / Import Firmware Upgrade Network Firewall Online Upgrade Phonebook Import/Export Screenshot Syslog Web Management Portal Web-based Packet Dump

Physical Specifications

Main LCD x1: 2.4-inch (320x240) Color Screen
DSS Key: N/A
Keypad: 1 OK Key 12 Standard phone digits keys 3 Line keys (with LED indicator light) 3 Volume control keys (Up/Down/Mute Microphone) 4 Navigation keys 4 Soft-keys 9 Function keys (Hold/Transfer/Voice message/Conference/Phonebook/MWI/Headset/Redial/Hands-free)
HD Handset: 1 x (RJ9)
Standard RJ9 Handset: 1 x Wire
Status Indicator Light: x1 (Red)
RJ9 Port x 2: Handset x1, Headset x1
RJ45 Port x2: Network x1 PC x1 (Bridged to Network)
Safety Keyhole: x1
Power Input: DC 5V/0.6A or PoE
Power Consumption (PoE): 1.32~2.09W
Working Humidity: 10~95%
Working Temperature: 0~45°C
Color: Black

Downloads

Documentation

KV-N2S4-P/V3

DatasheetPDF356.9 KB

Download

Compare products

Compare this product with similar products

Please wait

Frequently asked questions

Questions about this product

Where should I start when choosing the right IP phones?

Start by defining the intended use, the number of devices, the installation environment, the capacity required and your plans for future expansion. Then choose the model and technical specifications based on what the project actually needs.

Which technical specifications matter most for IP phones?

Depending on the project, the most important specifications are capacity, speed, compatibility, environmental ratings, management features and scalability. Basing your choice on a single figure is usually not enough.

Is a cheaper IP phone model always the right choice?

No. The purchase price is only one factor. You also need to consider reliability, features, service life, after-sales service and maintenance costs.

How do I work out how much capacity an IP phone system needs?

Base the calculation on the number of devices, actual usage, how long the system will be in use and how much the project is likely to grow. It is also wise to keep some capacity in reserve.

Can IP phones be upgraded later?

In many cases, some of the capacity or equipment can be upgraded. However, this depends on the product's architecture and its hardware limitations, so check before you buy.

Frequently asked questions: IP Phones

Answers to common questions about this product line, from the KDT Help Center.

Why isn't my IP phone working properly?

First check the power, the cable or connection, the settings, the network address and the software status. Then you can move on to more in-depth checks and the logs.

Open in the Help Center

Where should I start when choosing the right IP phones?

Start by defining the intended use, the number of devices, the installation environment, the capacity required and your plans for future expansion. Then choose the model and technical specifications based on what the project actually needs.

Open in the Help Center

Which technical specifications matter most for IP phones?

Depending on the project, the most important specifications are capacity, speed, compatibility, environmental ratings, management features and scalability. Basing your choice on a single figure is usually not enough.

Open in the Help Center

Is a cheaper IP phone model always the right choice?

No. The purchase price is only one factor. You also need to consider reliability, features, service life, after-sales service and maintenance costs.

Open in the Help Center

How do I work out how much capacity an IP phone system needs?

Base the calculation on the number of devices, actual usage, how long the system will be in use and how much the project is likely to grow. It is also wise to keep some capacity in reserve.

Open in the Help Center

All questions on this topic (50)

Didn’t find your answer?

Ask the support assistant Help Center