The KB-WM1-TR wireless expansion module from the Rhenium series is a transmitter and expansion interface designed to connect wired devices to wireless security systems.
Overview
The KB-WM1-TR wireless expansion module from the Rhenium series is a transmitter and expansion interface designed to connect wired devices to wireless security systems. Operating on the 868 MHz radio band, it transmits signals at distances of up to 500 m and provides one 1 A relay output for controlling peripheral devices. A compact size, very low sleep current (below 50 µA), and power from three CR123A batteries make it a flexible tool for expanding security systems.
Electrical & Power
- Operating Voltage
- 3xCR123A, DC3V
Wireless Spacification
- Radio Frequency
- 868MHz
- Transmission Power
- ≤ 13dBm
- Transmission Range
- 500m
Detection performance
- Quiescent Current
- < 50μA
- Relay
-
DC24V/
1A AC120V/ 1A - Output Power
- DC3.3V Max10mA
General
- Dimensions
- 113x50x22mm
- Operating Temp
- -10°C ~ 55°C
- Operating Humidity
- 5% ~ 95%RH (non-condensing)
- Compliance Standards
- CE
Downloads
Documentation
-
KB-WM1-TR
Compare products
Compare this product with similar products
Please wait
Frequently asked questions: Burglar Alarm Systems
Answers to common questions about this product line, from the KDT Help Center.
Can burglar alarm systems be managed remotely?
Yes, if the product and the network architecture support it. Remote access must also be protected with authentication, a secure connection and access restrictions.
Where should I start when choosing the right burglar alarm system?
Start by defining the intended use, the number of devices, the installation environment, the capacity required and your plans for future expansion. Then choose the model and technical specifications based on what the project actually needs.
Which technical specifications matter most for burglar alarm systems?
Depending on the project, the most important specifications are capacity, speed, compatibility, environmental ratings, management features and scalability. Basing your choice on a single figure is usually not enough.
Is a cheaper burglar alarm model always the right choice?
No. The purchase price is only one factor. You also need to consider reliability, features, service life, after-sales service and maintenance costs.
How do I work out how much capacity a burglar alarm system needs?
Base the calculation on the number of devices, actual usage, how long the system will be in use and how much the project is likely to grow. It is also wise to keep some capacity in reserve.
Didn’t find your answer?
Related products
Intrusion Alarm SystemKB-M2
Smart Alarm BoxKB-SAB-IO64
Remote ControllerKB-R2
Wireless KeypadKB-K2-W
Indoor PIRKB-PI2-W
Wired PIRKB-P1
Curtain PIRKB-PC1-W
Dual-Tech Outdoor PIRKB-PO1-W
Wireless Carbon Monoxide DetectorKB-CMD1-W
Wireless Smoke DetectorKB-SD1-W
Wireless MagnetKB-MG1-W
Wireless Water Leakage SensorKB-WLS1-W