The KB-SAB-IO64 from the Rhenium series is a smart status-monitoring gateway: an advanced integration device engineered for centralized physical security management within the KDT ecosystem.
-
Wireless
WiFi
-
User Interface
GUI
-
Power
POE
Overview
The KB-SAB-IO64 from the Rhenium series is a smart status-monitoring gateway: an advanced integration device engineered for centralized physical security management within the KDT ecosystem. It provides 6 input channels for wired sensors, 4 programmable PGM outputs and a separate 12V output for powering PIR motion detectors and external detectors. Secure two-way wireless communication on 868/433 MHz with a range of up to 800 meters, a PoE-capable network port and an edge-processing logic engine for defining conditional scenarios make this module a powerful tool for smarter alarm handling.
Wireless Spacification
- Frequency
-
868/
433 MHz - Range
- Up to 800m (Open Area)
Network & Protocols
- Data Interface
-
1 × RJ45 10/
100 Mbps Ethernet Port - Protocols
-
HTTP, MQTT (IoT standard), TCP/
IP - Management
- Alarm Box Server, Web UI (Built-in)
- Compatibility
- Keypad Native sync with KDT Wireless Sensors Sirens Wireless Relay and Remote Controllers
Wired I/O
- Sensor Inputs
-
6 Independent Channels (Supports NO/
NC wired detectors) - PGM Outputs
- 4 Programmable Output Channels (For relays & access control integration
- Aux Power Output
- 1 × 12V DC Output (Dedicated for powering external wired sensors)
Edge Intelligence
- Event & Alarm Linking
-
Camera Events to PGM/
Siren Mapping etc - Logic Controller
-
On-board Rule Engine (If/
Then Logic Execution)
General
- Input Voltage
- PoE / 12V DC
- Mounting
- Wall-mount/ Rack-mount
- Operating Temp
-
-10°C ~ +
55°C - Humidity
- 10% ~ 90% RH (Non-condensing)
- Dimensions
- 140*70*30 mm
Downloads
Documentation
-
KB-SAB-IO64
Compare products
Compare this product with similar products
Please wait
Frequently asked questions: Burglar Alarm Systems
Answers to common questions about this product line, from the KDT Help Center.
Can burglar alarm systems be managed remotely?
Yes, if the product and the network architecture support it. Remote access must also be protected with authentication, a secure connection and access restrictions.
Where should I start when choosing the right burglar alarm system?
Start by defining the intended use, the number of devices, the installation environment, the capacity required and your plans for future expansion. Then choose the model and technical specifications based on what the project actually needs.
Which technical specifications matter most for burglar alarm systems?
Depending on the project, the most important specifications are capacity, speed, compatibility, environmental ratings, management features and scalability. Basing your choice on a single figure is usually not enough.
Is a cheaper burglar alarm model always the right choice?
No. The purchase price is only one factor. You also need to consider reliability, features, service life, after-sales service and maintenance costs.
How do I work out how much capacity a burglar alarm system needs?
Base the calculation on the number of devices, actual usage, how long the system will be in use and how much the project is likely to grow. It is also wise to keep some capacity in reserve.
Didn’t find your answer?
Related products
Intrusion Alarm SystemKB-M2
Remote ControllerKB-R2
Wireless KeypadKB-K2-W
Indoor PIRKB-PI2-W
Wired PIRKB-P1
Curtain PIRKB-PC1-W
Dual-Tech Outdoor PIRKB-PO1-W
Wireless Carbon Monoxide DetectorKB-CMD1-W
Wireless Smoke DetectorKB-SD1-W
Wireless MagnetKB-MG1-W
Wireless Water Leakage SensorKB-WLS1-W
Expansion BoxKB-IO64-P-EXB