The KB-P1 wired motion sensor from the Rhenium series is a precise infrared detector designed to detect intrusion in indoor areas protected by a security system.
Overview
The KB-P1 wired motion sensor from the Rhenium series is a precise infrared detector designed to detect intrusion in indoor areas protected by a security system. With a wide 110° viewing angle and a 12 m detection range, it provides full coverage for residential and commercial spaces. Support for Away and Stay arming modes, a 10 to 15 V DC operating voltage, and LED indicators for alarm and fault status make it a reliable component of wired security systems.
Software Specifications
- Arm modes
-
Away/
Stay
Electrical Characteristics
- Working Current
-
≤150uA
(Static current) ≤30mA(Alarm current) - Transmitted power
- 10mW
Display
- LEDs status
- Alarm, Battery low, Fault
Hardware Features
- Type
- Wired
- Power
- DC 10V~15V
- Sensor
- Infrared
General
- Operating Temp
-
-20 °C to +
60 °C - Dimensions
- 130mm*64mm*43mm , ±1mm
- Color
- White
- Installation Height
- 2~2.2m
- Weight
- 86.5 g
- Detective Angle
- 110°C
- Detective Distance
- 12m
Downloads
Documentation
-
KB-P1
Compare products
Compare this product with similar products
Please wait
Frequently asked questions: Burglar Alarm Systems
Answers to common questions about this product line, from the KDT Help Center.
Can burglar alarm systems be managed remotely?
Yes, if the product and the network architecture support it. Remote access must also be protected with authentication, a secure connection and access restrictions.
Where should I start when choosing the right burglar alarm system?
Start by defining the intended use, the number of devices, the installation environment, the capacity required and your plans for future expansion. Then choose the model and technical specifications based on what the project actually needs.
Which technical specifications matter most for burglar alarm systems?
Depending on the project, the most important specifications are capacity, speed, compatibility, environmental ratings, management features and scalability. Basing your choice on a single figure is usually not enough.
Is a cheaper burglar alarm model always the right choice?
No. The purchase price is only one factor. You also need to consider reliability, features, service life, after-sales service and maintenance costs.
How do I work out how much capacity a burglar alarm system needs?
Base the calculation on the number of devices, actual usage, how long the system will be in use and how much the project is likely to grow. It is also wise to keep some capacity in reserve.
Didn’t find your answer?
Related products
Intrusion Alarm SystemKB-M2
Smart Alarm BoxKB-SAB-IO64
Remote ControllerKB-R2
Wireless KeypadKB-K2-W
Indoor PIRKB-PI2-W
Curtain PIRKB-PC1-W
Dual-Tech Outdoor PIRKB-PO1-W
Wireless Carbon Monoxide DetectorKB-CMD1-W
Wireless Smoke DetectorKB-SD1-W
Wireless MagnetKB-MG1-W
Wireless Water Leakage SensorKB-WLS1-W
Expansion BoxKB-IO64-P-EXB