Media Converter MC-0202H4ST

Overview

The MC-0202H4ST from the Platinum series is a high-performance fiber-to-Ethernet media converter designed to extend the reach of professional networks. This fanless unit is equipped with 2 Gigabit SFP uplink ports, 1 Gigabit RJ45 uplink port and 1 Fast Ethernet RJ45 uplink port, and delivers 8 Gbps of internal bandwidth. A rugged all-metal housing that mounts in a rack, on a desktop or on an industrial DIN rail, together with support for a wide range of SFP modules, makes it a flexible and reliable solution for integrating copper and fiber infrastructure.

Technical specifications

Datasheet (PDF)

Model: MC-0202H4ST

Interfaces

Total Port: 4 Ports
Fast RJ45 Uplink Port: N/A
Gigabit RJ45 Uplink Port: 1
Gigabit SFP Uplink Port: 2
Power Transmit RJ45: 1 (Male)

Hardware

Processor Type: XS
LED Panel: Data Activity
Main Board: Double Layer
Case: Metal Case
Mounting: Rackmount / Desktop / Din-Rail

PD`S

IP Camera: N/A
IP Phone: N/A
(+)4/5,(: N/A
(+)1/2,(: N/A

Status

LED: Ethernet Interfaces 1000 LNK/ACT (Orange), 10/100 LNK/ACT (Green)

Power Supply

Power: 200~240V AC, 50~60Hz
Redundant: Yes (K+ Feature)
LED Power: Yes
Power Cable: Available

Network Performance

Standard: IEEE802.3ab, IEEE802.3az, IEEE802.3u, IEEE802.3x
Protocols: CSMA/CD
Speed: Ethernet 10Mbps (half duplex), 20Mbps (full duplex); 10BASE-T: 14,880bps/port Fast Ethernet 100Mbps (half duplex), 200Mbps (full duplex); 100BASE-TX:14,8800bps/port Gigabit Ethernet 1000Mbps (half duplex), 2000Mbps (full duplex); 1000BASE-TX: 1488000bps/port
Cabling: 1000 Base-TX: Cat 6 UTP or above (100m) 100Base-TX:Cat 6 UTP(120m) PoE=250M 10Base-TX: Cat 5 or above (250m) PoE=250M
Bandwidth: 8Gb Internal Bandwidth
MAC Table: 8Kb
Auto MDI: Yes All Ports
Console: N/A
Transfer Pattern: Store & Forward

General

Protection Rating: IP51
Web Language: N/A
Dimensions: 157*112*45 mm
Weight: 505 g
Storage Temperature: -20°C ~ +60°C / 10% ~ 90% RH
Operating Temperature: -15°C ~ +50°C / 10% ~ 90% RH
Radiation Electromagnetic: EN55016

Guarantee

Product Guarantee: 3 Years Platinum Guarantee
MTBF: 100,000 hrs min. MIL-HDBK-217F (25°)

Downloads

Documentation

MC-0202H4ST

DatasheetPDF301.2 KB

Download

Compare products

Compare this product with similar products

Please wait

Frequently asked questions

Questions about this product

Where should I start when choosing the right network switches?

Start by defining the intended use, the number of devices, the installation environment, the capacity required and your plans for future expansion. Then choose the model and technical specifications based on what the project actually needs.

Which technical specifications matter most for network switches?

Depending on the project, the most important specifications are capacity, speed, compatibility, environmental ratings, management features and scalability. Basing your choice on a single figure is usually not enough.

Is a cheaper network switch model always the right choice?

No. The purchase price is only one factor. You also need to consider reliability, features, service life, after-sales service and maintenance costs.

How do I work out how much capacity a switched network needs?

Base the calculation on the number of devices, actual usage, how long the system will be in use and how much the project is likely to grow. It is also wise to keep some capacity in reserve.

Can network switches be upgraded later?

In many cases, some of the capacity or equipment can be upgraded. However, this depends on the product's architecture and its hardware limitations, so check before you buy.

Frequently asked questions: Network Switches

Answers to common questions about this product line, from the KDT Help Center.

Where should I start when choosing the right network switches?

Start by defining the intended use, the number of devices, the installation environment, the capacity required and your plans for future expansion. Then choose the model and technical specifications based on what the project actually needs.

Open in the Help Center

Which technical specifications matter most for network switches?

Depending on the project, the most important specifications are capacity, speed, compatibility, environmental ratings, management features and scalability. Basing your choice on a single figure is usually not enough.

Open in the Help Center

Is a cheaper network switch model always the right choice?

No. The purchase price is only one factor. You also need to consider reliability, features, service life, after-sales service and maintenance costs.

Open in the Help Center

How do I work out how much capacity a switched network needs?

Base the calculation on the number of devices, actual usage, how long the system will be in use and how much the project is likely to grow. It is also wise to keep some capacity in reserve.

Open in the Help Center

Can network switches be upgraded later?

In many cases, some of the capacity or equipment can be upgraded. However, this depends on the product's architecture and its hardware limitations, so check before you buy.

Open in the Help Center

All questions on this topic (50)

Didn’t find your answer?

Ask the support assistant Help Center