Name: Fast Ethernet AI PoE+ Switch KP-0803H2FT
Brand: KDT
SKU: KP-0803H2FT

Overview

With 8 PoE ports and smart AI features, the KP-0803H2FT from the Platinum series optimizes traffic without any manual configuration. Its electrostatic powder-coated housing is highly resistant to lightning surges, severe power fluctuations and physical damage. A built-in Watchdog feature continuously monitors the ports, keeping the network stable in projects where the equipment is hard to reach.

Technical specifications

Datasheet (PDF)

Model: KP-0803H2FT

Interfaces

Total Port: 11 Ports
PoE Output (Max): 200 Watt
PoE Port Control: IC+ IP804AR
Fast RJ45 PoE Port: 8
Gigabit RJ45 PoE Port: N/A
Fast RJ45 Uplink Port: 2
Gigabit RJ45 Uplink Port: N/A
Gigabit SFP Uplink Port: N/A
Combo Uplink Port: N/A
Power Transmit RJ45: 1 (Female)
Dip Switch Ai: Yes

Hardware

Processor Type: IC+
LED Panel: Data Activity, PoE Activity, Power Activity, Redundant Activity
Main Board: Double Layer
Case: Metal Case
Mounting: Rackmount / Desktop

General

Protection Rating: IP51
Web Language: N/A
Dimensions: 245*145*45 mm
Weight: 1.198 kg
Storage Temperature: -20°C ~ +60°C / 10% ~ 90% RH
Operating Temperature: -15°C ~ +50°C / 10% ~ 90% RH
Radiation Electromagnetic: EN55016

Guarantee

Product Guarantee: 3 Years Platinum Guarantee
MTBF: 100,000 hrs min. MIL-HDBK-217F (25°)

Network Performance

Standard: IEEE802.3ab, IEEE802.3af, IEEE802.3at, IEEE802.3az, IEEE802.3u, IEEE802.3x
Protocols: CSMA/CD
Speed: Ethernet 10Mbps (half duplex), 20Mbps (full duplex); 10BASE-T: 14,880bps/port Fast Ethernet 100Mbps (half duplex), 200Mbps (full duplex); 100BASE-TX:14,8800bps/port
Cabling: 1000Base-TX:Cat 6e UTP or Cat 6 UTP(100m) PoE=250M 100Base-TX:Cat 5 UTP(120m) PoE=250M 10Base-TX:Cat 3 or above Cat.5 UTP(250m) PoE=250M
Bandwidth: 2.2Gb Internal Bandwidth
MAC Table: 32Kb
Auto MDI: Yes All Ports
Console: N/A
Transfer Pattern: Store & Forward

PD`S

IP Camera: Yes
IP Phone: Yes
(+)2/1,(: Yes

Function Ai

Vlan: Yes / By Setting Dip Switch Number 1(P1-P7)
250 Extend: Yes / By Setting Dip Switch Number 2(P1-P7)
Watchdog: Yes / Enabled By Default(P1-P8)

Power Supply

Power: 200~240V AC, 50~60Hz
Redundant: Yes (K+ Feature)
LED Power: Yes
Power Cable: Available

Downloads

Documentation

KP-0803H2FT

DatasheetPDF388 KB

Download

Compare products

Compare this product with similar products

Please wait

Frequently asked questions: Network Switches

Answers to common questions about this product line, from the KDT Help Center.

Where should I start when choosing the right network switches?

Start by defining the intended use, the number of devices, the installation environment, the capacity required and your plans for future expansion. Then choose the model and technical specifications based on what the project actually needs.

Open in the Help Center

Which technical specifications matter most for network switches?

Depending on the project, the most important specifications are capacity, speed, compatibility, environmental ratings, management features and scalability. Basing your choice on a single figure is usually not enough.

Open in the Help Center

Is a cheaper network switch model always the right choice?

No. The purchase price is only one factor. You also need to consider reliability, features, service life, after-sales service and maintenance costs.

Open in the Help Center

How do I work out how much capacity a switched network needs?

Base the calculation on the number of devices, actual usage, how long the system will be in use and how much the project is likely to grow. It is also wise to keep some capacity in reserve.

Open in the Help Center

Can network switches be upgraded later?

In many cases, some of the capacity or equipment can be upgraded. However, this depends on the product's architecture and its hardware limitations, so check before you buy.

Open in the Help Center

All questions on this topic (50)

Didn’t find your answer?

Ask the support assistant Help Center