Cat 6 Indoor S/FTP Network Cable

Name: Cat 6 Indoor S/FTP Network Cable NC-Cuprum 6SFTPI
Brand: KDT
SKU: NC-Cuprum 6SFTPI

Model NC-Cuprum 6SFTPI

With an aluminum protective layer and a braided shield, the NC-Cuprum 6SFTPI cable from the Lithium series fully protects your data against electromagnetic interference (EMI).

Download datasheet Contact us

Overview

With an aluminum protective layer and a braided shield, the NC-Cuprum 6SFTPI cable from the Lithium series fully protects your data against electromagnetic interference (EMI). The high-purity copper used in this Cat6 cable significantly improves transmission efficiency in sensitive enterprise networks that require complete isolation.

Technical specifications

Datasheet (PDF)

Model: NC-Cuprum 6SFTPI

Conductor

Size: 23 AWG
Design Type: 1 Jacket, Copper Wires, Foil, Shield, Spacer
Diameter (mm): 0.5 ± 0.55

Jacket

Min Bending Radius: 50 mm
Installation Temperature: -10°C to +60°C
Jacket Type: PVC
Overall Diameter: 8.1 ± 0.3 mm

Insulation

Type: SFTP-Indoor
Cable Diameter: Nom. 5.5±0.5 mm
Jacket Thickness: Nominal Thickness = 0.56 mm
Shielding: Aluminium, Polyester Foil

Physical

1. Cold Bend Test: -30 ± 2°C X 4hrs no crack
2. Dielectric strength: AC 1.7KV for 2s

Downloads

Documentation

NC-Cuprum 6SFTPI

DatasheetPDF376.7 KB

Download

Compare products

Compare this product with similar products

Please wait

Frequently asked questions: Infrastructure

Answers to common questions about this product line, from the KDT Help Center.

Where should I start when choosing the right infrastructure equipment?

Start by defining the intended use, the number of devices, the installation environment, the capacity required and your plans for future expansion. Then choose the model and technical specifications based on what the project actually needs.

Open in the Help Center

Which technical specifications matter most for infrastructure equipment?

Depending on the project, the most important specifications are capacity, speed, compatibility, environmental ratings, management features and scalability. Basing your choice on a single figure is usually not enough.

Open in the Help Center

Is a cheaper infrastructure equipment model always the right choice?

No. The purchase price is only one factor. You also need to consider reliability, features, service life, after-sales service and maintenance costs.

Open in the Help Center

How do I work out how much capacity network infrastructure needs?

Base the calculation on the number of devices, actual usage, how long the system will be in use and how much the project is likely to grow. It is also wise to keep some capacity in reserve.

Open in the Help Center

Can infrastructure equipment be upgraded later?

In many cases, some of the capacity or equipment can be upgraded. However, this depends on the product's architecture and its hardware limitations, so check before you buy.

Open in the Help Center

All questions on this topic (50)

Didn’t find your answer?

Ask the support assistant Help Center