Skip to main content
Contact us
Cuprium Cabling Infrastructure

Cat 6 RJ45 UTP Modular Plug

Model NS-3U 8P 6UTP
NS-3U 8P 6UTP

The KDT NS-3U 8P 6UTP modular plug from the Cuprium series is a high-quality RJ45 connector for Cat 6 UTP cables.

Download datasheet Contact us

Overview

The KDT NS-3U 8P 6UTP modular plug from the Cuprium series is a high-quality RJ45 connector for Cat 6 UTP cables. Compatible with 23–24 AWG cable, it supports both T568A and T568B wiring standards, and its 0.3-micron gold-plated contacts ensure a stable connection and reliable data transmission.

Technical specifications

Datasheet (PDF)

Model: NS-3U 8P 6UTP

UTP Socket

Applicable Standards
T568A, T568B
Type
UTP - Cat6
Contact Resistance
20 ohms
Insulation Resistance
100 ohms
Temperature Rating (Min / Max)
-40/80 °C
Weight
3.4g / pcs
Wire Awg
24AWG to 23AWG
Conductor Diameter
0.40/0.55mm
Cord Diameter
1.1mm
Finished
0.3 Micro-Inch Gold Plating
Material
PVC

Downloads

Documentation

  • NS-3U 8P 6UTP

    DatasheetPDF393.5 KB

    Download

Compare products

Compare this product with similar products

Please wait

Frequently asked questions: Infrastructure

Answers to common questions about this product line, from the KDT Help Center.

Where should I start when choosing the right infrastructure equipment?

Start by defining the intended use, the number of devices, the installation environment, the capacity required and your plans for future expansion. Then choose the model and technical specifications based on what the project actually needs.

Open in the Help Center
Which technical specifications matter most for infrastructure equipment?

Depending on the project, the most important specifications are capacity, speed, compatibility, environmental ratings, management features and scalability. Basing your choice on a single figure is usually not enough.

Open in the Help Center
Is a cheaper infrastructure equipment model always the right choice?

No. The purchase price is only one factor. You also need to consider reliability, features, service life, after-sales service and maintenance costs.

Open in the Help Center
How do I work out how much capacity network infrastructure needs?

Base the calculation on the number of devices, actual usage, how long the system will be in use and how much the project is likely to grow. It is also wise to keep some capacity in reserve.

Open in the Help Center
Can infrastructure equipment be upgraded later?

In many cases, some of the capacity or equipment can be upgraded. However, this depends on the product's architecture and its hardware limitations, so check before you buy.

Open in the Help Center

All questions on this topic (50)

Didn’t find your answer?

Ask the support assistant Help Center

Related products

All products in Cuprium Cabling Infrastructure