Single Strand BiDi SFP Optical Transceiver

Model KG-GLC20BiDi

The KG-GLC20BiDi bidirectional fiber optic module from the Cuprium series is a smart, cost-effective way to send and receive data simultaneously over a single fiber strand.

Download datasheet Contact us

Overview

The KG-GLC20BiDi bidirectional fiber optic module from the Cuprium series is a smart, cost-effective way to send and receive data simultaneously over a single fiber strand. Using two wavelengths, this BiDi transceiver cuts fiber cable usage by 50%, and with its aluminum housing, DDM support and wide compatibility, it is an ideal choice for getting more out of existing fiber infrastructure.

Technical specifications

Datasheet (PDF)

Model: KG-GLC20BiDi

Performance

Max Data Transfer Rate: 1.25 Gbps
MTBF: 3,381,761 Hours
Wavelength: 1550nm B
Max Transfer Distance: 20 Km
Fiber Type: Single / LC
Fiber Operating Mode: Full-Duplex
DDM: Yes
Compatible Networks: 1000 Mbps (1 Gbps)

Connector(s)

Local Unit Connectors: Fiber Optic LC Duplex Female

Physical Characteristics

Color: Silver
Enclosure Type: Aluminum
Product Height: 12.5 mm [0.5 in]
Product Length: 56.6 mm [2.2 in]
Product Weight: 16 g [0.6 oz]
Product Width: 13.7 mm [0.5 in]

Hardware

Industry Standards: IEEE 802.3z 1000BASE-SX
Compatible Brand: Cisco, D-Link, etc, KDT, Planet

Downloads

Documentation

KG-GLC20BiDi

DatasheetPDF333.5 KB

Download

Compare products

Compare this product with similar products

Please wait

Frequently asked questions: Fiber Optic Products

Answers to common questions about this product line, from the KDT Help Center.

Where should I start when choosing the right fiber optic products?

Start by defining the intended use, the number of devices, the installation environment, the capacity required and your plans for future expansion. Then choose the model and technical specifications based on what the project actually needs.

Open in the Help Center

Which technical specifications matter most for fiber optic products?

Depending on the project, the most important specifications are capacity, speed, compatibility, environmental ratings, management features and scalability. Basing your choice on a single figure is usually not enough.

Open in the Help Center

Is a cheaper fiber optic product model always the right choice?

No. The purchase price is only one factor. You also need to consider reliability, features, service life, after-sales service and maintenance costs.

Open in the Help Center

How do I work out how much capacity a fiber optic network needs?

Base the calculation on the number of devices, actual usage, how long the system will be in use and how much the project is likely to grow. It is also wise to keep some capacity in reserve.

Open in the Help Center

Can fiber optic products be upgraded later?

In many cases, some of the capacity or equipment can be upgraded. However, this depends on the product's architecture and its hardware limitations, so check before you buy.

Open in the Help Center

All questions on this topic (50)

Didn’t find your answer?

Ask the support assistant Help Center